Inland Fume Trap

The FumeTrapTM provides a safer soldering environment by drawing fumes away from the person soldering and traps them in a disposable activated carbon filter. Anyone aware of the need for a safer environment when soldering is an excellent customer for a FumeTrapTM. All hobbyists that solder, glue, and paint should use a ventilation system that evacuates or collects and holds fumes, not re-circulating them as a simple blower fan would. The most effective system is one that filters and vents to the outside. (Before venting anything to the outside, check with your local government for emissions regulations.) Since most artists and hobbyists can't install such a system, the FumeTrapTM fills the need by removing and adsorbing the fumes and vapors created during these processes. Most fluxes generate organic and inorganic gases and vapors which we don't think about, but are also harmful with prolonged exposure. The FumeTrapTM provides an economic means of removing the fumes and vapors created when soldering stained glass. It's lightweight enough to place right on the project being soldered with soft rubber feet to protect the surface. Equipping classrooms with FumeTrap'sTM is an effective way to demonstrate the product and improve safety awareness PRODUCT SPECS: Construction: Stamped steel housing. Color: Gray fleck body with plastic handle. Size: 5" wide x 5" high x 6" deep. Weight: 3 lb., 9 oz. 1 Amp Draw 110 CFM (Cubic Feet / Minute of air moved